We keep this cam in stock for the speedway guys. It is a high RPM max effort cam which has be tested to 7000+ RPM. Will require Supporting mods, exhaust, torque converter etc.
Suits VS VT VX VY V6 ecotec L36 engines
This cam will require aftermarket valve springs. We stock and recommend 4918-12 crow single pack .570″ lift springs.
With 110 Lobe Separation Angle this would need an aftermarket computer or a memcal with a suitable tune to suit this camshaft.
If you are after a smaller stage 1,2 or 3 cam please reach out for a quote.
- Here at Malex Motorsports all of our items are in stock in our Sydney based store, ready to ship or pick up.
- NOW IN SMEATON GRANGE!
Advertised Valve Timing at height – 0.006 inches
Inlet Opens – 35 degrees BTDC
Inlet Closes – 71 degrees ABDC
Exhaust Opens – 78 degrees BBDC
Exhaust Closes – 34 degrees ATDC
Inlet Valve Duration – 286 degrees
Exhaust Valve Duration – 293 degrees
Inlet Valve Lift with 1.6 to 1 ratio rockers – 0.5115 inches
Exhaust Valve Lift with 1.6 to 1 ratio rockers – 0.5139 inches
Inlet Valve Lift for #1 Cylinder InTake Valve at TDC – 0.104 inches
0.050 Valve Timing
Inlet Opens – 5 degrees BTDC
Inlet Closes – 41 degrees ABDC
Exhaust Opens – 48 degrees BBDC
Exhaust Closes – 4 degrees ATDC
Inlet Valve Duration – 226 degrees
Exhaust Valve Duration – 232 degrees
Inlet Valve Lift with 1.6 to 1 ratio rockers – 0.5115 inches
Exhaust Valve Lift with 1.6 to 1 ratio rockers – 0.5139 inches
Ramp Rate – 2.56
Valve Overlap Seat to Seat – 69 degrees
Valve Overlap at 0.050 inches – 9 degrees
Inlet Lobe Centreline – 108 degrees
Exhaust Lobe Centreline – 112 degrees
Lobe Separation Angle – 110 degrees